INTECON XH

Fully automatic terminating machine for IDC Connector.

MAIN FEATURES

• Feeding system: up to 3 different wires, wire length freely programmable (5 wires optional)
• Free and crossing wires as well as loops or one-side wire terminations are producible
• wire length = 195 mm (Loops), 80 mm (Free wire)
• wire length = 3000 mm (Loops), 1500 mm (Free wire)
• Simultaneous processing connectors with different number of ways, coding versions etc.
• Max Production configuration: 54 contact positions for Rast 2,5; 28 contact positions for Rast 5
• Connector loading system without machine stop
• Terminating Unit with fine adjustment termination height
• Test device for the correct wire position in the connector
• Continuity Test
• Coding station, full automatic setting blade
• Test device of the correct key cutting
• Selective destroying unit of bad harness
• User friendly HMI based on Windows O.S.
• Internet connection for remote assistance
• Conveyor guide for good harnesses
• Expulsion of bad harnesses
• CE conformity

TECHNICAL DATA

• Power supply: 3P + N + PE 400 VAC, 50 Hz, 11 kW
• Air supply: 7 bar
• Air consumption: approx. 400 Nl/min
• Noise level < 80 dB(A)
• Dimensions: 7000 × 2100 × h 2150 mm (h 2700 mm safety shield open)
• Weight: approx 4500 kg (inclusive CRIMP Module)

CRIMP MODULE

• Max 2 Crimping units, with CFA
• Wire Feeding up to 3 different wires, length freely programmable (5 wires optional)
• wire length = 80 mm (Free / Crimped / Stripped wires)
• wire length = 1500 mm (Free / Crimped / Stripped wires)
• Carrier strip chopper
• Paper take-up
• Sleeve Insertion Unit (optional)
• Seal Station Unit (optional)
• Dimensions: included in the dimensions of the machine
• Weight: approx. 1500 kg