INTECON S

Fully automatic terminating machine for IDC Connector.

MAIN FEATURES

• Feeding system: up to 10 different wires, wire length freely programmable
• Free and crossing wires as well as loops or one-side wire terminations are producible
• wire length = 150 mm (Loops), 55 mm (Free wire)
• wire length = 3000 mm (Loops), 1500 mm (Free wire)
• Simultaneous processing connectors with different number of ways, coding versions etc.
• Max Production configuration: 44 contact positions for Rast 2,5; 24 contact positions for Rast 5
• Connector loading system without machine stop
• Terminating Unit with fine adjustment termination height
• Test device for the correct wire position in the connector
• Continuity Test (optional)
• Coding station (optional)
• Test device for the correct key cutting (optional)
• Selective destroying unit of bad harness (optional)
• Tube Loader for finished harnesses – BLISTER (optional)
• User friendly HMI based on Windows O.S.
• Internet connection for remote assistance
• Conveyor guide for good harnesses
• Expulsion of bad harnesses
• CE conformity

TECHNICAL DATA

• Power supply: 3P + N + PE 400 VAC, 50 Hz, 7 kW
• Air supply: 7 bar
• Air consumption: approx. 150 Nl/min
• Noise level < 80 dB(A)
• Dimensions: 4700 × 3500 × h 2000 mm (h 2200 mm safety shield open)
• Weight: approx 1000 kg

CRIMP MODULE – Optional

• Max 3 Crimping units, with CFA
• Wire Feeding up to 6 different, length freely programmable
• wire length = 60 mm (Free / Crimped / Stripped wires)
• wire length = 1500 mm (Free / Crimped / Stripped wires)
• Carrier strip chopper (optional)
• Paper take-up (optional)
• Sleeve Insertion Unit (optional)
• Seal Station Unit (optional)
• Dimensions: 1300 × 2300 × h 2800 mm (safety shield open)
• Weight: approx. 1000 kg